Zone Offroad 6" Radius Arm Lift Kit for Ford F250/F350 2005-2007 4WD Diesel

Name: Zone Offroad 6" Radius Arm Lift Kit for Ford F250/F350 2005-2007 4WD Diesel
Brand: Zone Offroad
SKU: l440364
Price: 1481.15 USD
Availability: OutOfStock
Rating: 5 (8 reviews)

SIMILAR PARTS

Image Zone Offroad 6" Radius Arm Lift Kit for Ford F250/F350 2005-2007 4WD Diesel part in Lift Kits & Parts category

VERIFIED FITMENT

out Of Stock

$1,481.15

SKU: l440364

Fits:

Ford F250/F350 2005-07 ( 2005, 2006, 2007 )

SIMILAR PARTS

Notes:

4WD; Diesel
If your vehicle is equipped with both a stock 4" rear block and a top mounted over load spring, u-bolt # U4035 may be required.
Removal of the factory rear block is required. Net rear height gain will vary based on size of the factory block, but will result in a level stance.
If equipped with a 2-piece rear drive shaft, then a drivshaft alignment kit may be required. It is available in the optional accessories (part # F5401).
Although extremely rare, front drive line vibration may occur.

SHOW SIMILAR PRODUCTS

Features

Technical Details

Compatibility

Full compatibility list

Notes	Year	Make	Model	Trim	Engine
4WD; Diesel	2005	Ford	F-250 Super Duty	Harley-Davidson Edition Crew Cab Pickup 4-Door	6.0L 363Cu. In. V8 DIESEL OHV Turbocharged
4WD; Diesel	2005	Ford	F-250 Super Duty	King Ranch Crew Cab Pickup 4-Door	6.0L 363Cu. In. V8 DIESEL OHV Turbocharged
4WD; Diesel	2005	Ford	F-250 Super Duty	Lariat Crew Cab Pickup 4-Door	6.0L 363Cu. In. V8 DIESEL OHV Turbocharged
4WD; Diesel	2005	Ford	F-250 Super Duty	Lariat Extended Cab Pickup 4-Door	6.0L 363Cu. In. V8 DIESEL OHV Turbocharged
4WD; Diesel	2005	Ford	F-250 Super Duty	XL Crew Cab Pickup 4-Door	6.0L 363Cu. In. V8 DIESEL OHV Turbocharged
4WD; Diesel	2005	Ford	F-250 Super Duty	XL Extended Cab Pickup 4-Door	6.0L 363Cu. In. V8 DIESEL OHV Turbocharged
4WD; Diesel	2005	Ford	F-250 Super Duty	XL Standard Cab Pickup 2-Door	6.0L 363Cu. In. V8 DIESEL OHV Turbocharged
4WD; Diesel	2005	Ford	F-250 Super Duty	XLT Crew Cab Pickup 4-Door	6.0L 363Cu. In. V8 DIESEL OHV Turbocharged
4WD; Diesel	2005	Ford	F-250 Super Duty	XLT Extended Cab Pickup 4-Door	6.0L 363Cu. In. V8 DIESEL OHV Turbocharged
4WD; Diesel	2005	Ford	F-250 Super Duty	XLT Standard Cab Pickup 2-Door	6.0L 363Cu. In. V8 DIESEL OHV Turbocharged

Relevant Products

Pro Comp 3.5" Front 1-3" Rear Level Lift Nitro Kit 2005-2007 Ford F250/F350 4WD

$747.99

Additional Information

Description

The 6" Super Duty Radius Arm Systems include everything you need and more, including bullet proof radius arms made with 1" steel for optimal ground clearance compared to other drop bracket kits on the market, and gas or diesel specific coils that are made in America that will not sag. A dropped pitman arm and track bar relocation bracket are included in the 6" system to properly align the front axle after lifting.

To avoid stacking rear blocks or going too tall with a single block, Zone includes a 5" cast iron block with an integrated bump stop, and to achieve the additional lift for the 6" system a dual add-a-leaf kit is included. The block & AAL setup on the 6" system will reduce spring wrap, level the truck, and is also designed to shift the axle forward to ensure the tire stays centered in the rear wheel well.

1/4" boxed radius arms with oversize greasable bushings

Diesel or gas specific coil springs for an accurate lift height and proper ride quality

Increased ground clearance and better looks than a radius arm drop system

Track bar bracket and dropped pitman arm included to correct steering geometry

Sway bar drop brackets to maintain the OE sway bar angle

Front bump stop spacers

Front and rear brake line relocation brackets

Steering stabilizer relocation bracket

5" rear block with integrated bump stop

Single rear add-a-leaf

Designed to level the truck with removal of the factory block

Customer Reviews & Questions

No reviews yet 0

Zone Offroad 6" Radius Arm Lift Kit for Ford F250/F350 2005-2007 4WD Diesel

SKU: l440364

Fits:

Ford F250/F350 2005-07 ( 2005, 2006, 2007 )

Notes:

4WD; Diesel

If your vehicle is equipped with both a stock 4" rear block and a top mounted over load spring, u-bolt # U4035 may be required.

Removal of the factory rear block is required. Net rear height gain will vary based on size of the factory block, but will result in a level stance.

If equipped with a 2-piece rear drive shaft, then a drivshaft alignment kit may be required. It is available in the optional accessories (part # F5401).

Although extremely rare, front drive line vibration may occur.